Baxi Fires Division 828 Long Lite Guía de instalación

5112107/03OWNER GUIDE© Baxi Heating U.K. Limited 2006.INSTALLER: Please leave this guide with the ownerModel 347RADIANT / CONVECTOR GAS FIREFitted wit

REPLACING THE RADIANTS(See figure 4).Always use the correct type of replacement radiant. Ask for Baxi Fires Divisionpart number 5110472. Turn the fire

8.Remove any protective film from the replacement battery and place into the generator.The negative ( - ) terminal should go in first. The cap of the

! If you wish to replace the radiants, spare parts are available nationwide via the‘interpartstockist network’. For your local stockist consult Yello

© Baxi Heating U.K. Limited 2006.All rights reserved. No part of this publication may be reproduced in any material form(including photocopying), stor

Safety First.Baxi Fires Division fires are CE Approved and designed to meet the appropriate BritishStandards and Safety Marks.Quality and Excellence.A

LIST OF CONTENTSSectionPageSAFETY 4APPLIANCE DIMENSIONS 6OPERATING YOUR FIRE 7GAS CONSUMPTION 7The Oxysafe flame sensing and flue blockage safety

Do have the fire installed by a competent person. In the United Kingdom, installationmust be in accordance with the latest edition of the Gas Safety (

heat. They may, therefore, scorch or become discoloured when close to a heatingappliance. Please bear this in mind whenever you are considering redeco

GAS CONSUMPTIONHas a maximum natural gas input of 5.6kW (Gross)Has a maximum natural gas output of 4.0kW Has a minimum natural gas input of 1.57kW (Gr

If the pilot does not light, turn the knob backto OFF and try again.In the unlikely event of failure of the ignitionmechanism the pilot can be lit wit

!The control control knob can then be set to your preferred heat level. The settings are: -To turn off partially depress the knob and turn clockwise t